Diseño y simulación de un filtro activo de potencia para la eliminación de armónicos

Contenido principal del artículo

Fabián R. Jiménez L.
Pedro Fabián Cárdenas Herrera
Diana Lorena Morales

Resumen

Los filtros activos de potencia se han convertido en una alternativa viable para el conrol de niveles armónicos en las aplicaciones industriales y comerciales. Sin embargo, hay muchas técnicas diferentes de control current de filtros activos. Este documento analiza el estudio detallado de las definiciones de la corriente, y también la aplicación de algunos de los algoritmos con el fin de obtener el valor actual de las referencias. Se ha propuesto y desarrollado una metodología para el diseño de un filtro de potencia activa en paralelo. El estudio del comportamiento dinámico y como una alternativa al modelo de conmutación del filtro activo. Con la ayuda de Matlab Simulink y las simulaciones del filtro de poder paralelo activo.

Detalles del artículo

Cómo citar
L., F. R. J., Herrera, P. F. C., & Morales, D. L. (2013). Diseño y simulación de un filtro activo de potencia para la eliminación de armónicos. In Vestigium Ire, 3(1). Recuperado a partir de http://revistas.ustatunja.edu.co/index.php/ivestigium/article/view/159
Sección
In Vestigium Ire Vol.3

Citas

Stefanovic, V. and Nelms, R. (1991) “microprocessor control of motor drives and power converters,” in Tutorial course Rec., IEEE-IAS Annu. Meeting, Dearborn, MI.

Wuest, D. and Jenni, F. (1993) “space vector based current control schemes for voltaje sourcen inverters,” in conf. Rec. IEEE PESC’93, Seattle, WA.

Van der broeck, H. Skudelny, H, and Stanke, G., (1988) “Analysis and relization of a pulse width modulator based on voltaje space vectors,” IEEE Trans. Ind. Applicat., vol. 24.

Brod , D. and novotny, D, (1985) “current control of VSI-PWM inverters,” IEEE Trans. Ind. Applicat., vol. IA-21.

H. Akagi, “new trends in active filters forr power conditioniing” IEEE trans. Ind. Applicat., vol.32, pp.1312- 133, nov. 1996.

M.P. kazmierkowski and M.A. Dzieniakowski, (1994). “review of current regulation techniques for three- phase PWM inverters,” in proc. IEEE IECON’ 94.

H. Akagi and A. Nabae, (1986) “control strategy of active power filters using multiple voltaje soure PWM CONVERTERS”. IEEE Trans. Ind. Applicat., vol. IA-22.

L. Malesani, L. Rossetto, and P. Tenti, (1986). “active filter for reactive power and harmonics compensation, in Proc. IEEE PESC’ 86.

T.M. Rowan and R. J. kerkman, (1986). “a new synchronous current regulator and an analysis of current regulated PWM inverters,” IEEE Trans. Ind. Applicat., vol. IA-22.
T.M. Rowan, R.J. Kerkman, and T. A. Lipo, (1987). “operation of naturally sampled current regulators in the transition región,” IEEE Trans. Ind. Applicat., vol. IA- 23.

C.T. Rim, N.S. Choi, G.C. Cho, (1994). “a complete DC and AC analysis of theree- phase controlled- current PWM rectifier using circuit D-Q transformation,” IEEE Trans. Power Electron., vol.9.

N. R. Zargari and G. Joos, (1993). “performance investigation of a current controlled voltage- regulated PWM rctifier in rotating and stationary frames,” in Proc. IEEE IECON’ 93.

D. G. Holmes and D. A. Martin, (1996) “implementation of direct digital predictive current controller for single and three phase voltage source inverters,” in conf. Rec. IEEE-IAS Annu. Meeting.