Aplicación del modelo de Hosford-Caddel en para la estimación de la recuperación elástica de láminas metálicas conformadas en frío
Main Article Content
Abstract
Downloads
Article Details
DECLARATION OF ORGINIALITY OF SUBMITTED ARTICLE
With this document, I/We certify that the article submitted for possible publication in the institutional journal INGENIO MAGNO of the Research Center Alberto Magno CIIAM of the University Santo Tomás, Tunja campus, is entirely of my(our) own writing, and is a product of my(our) direct intellectual contribution to knowledge.
All data and references to completed publications are duly identified with their respective bibliographical entries and in the citations thus highlighted. If any adjustment or correction is needed, I(we) will contact the journal authorities in advance.
Due to that stated above, I(we) declare that the entirety of the submitted material is in accordance with applicable laws regarding intellectual and industrial property, and therefore, I(we) hold myself(ourselves) responsible for any complaint related to it.
If the submitted article is published, I(we) declare that I(we) fully relinquish publishing rights of the article to the University Santo Tomás, Tunja campus. As remuneration for this relinquishment of rights, I(we) declare my(our) agreement to receive two (2) copies of the edition of the journal in which my(our) article appears.
References
Abdullah, A et al. A comprehensive review of experimental approaches used in the measurement of springback. Advances in natural and applied scieces. (2012). vol. 6, no 2, 195-205.
Marciniak,Z. (2002). Bending of Sheet. Mechanics of Sheet Metal Forming. pp. 82-107. Oxford. Butterworth-Heinemann.
Meyers,M(Ed). (2009).Plasticity. Mechanical Behaviour of Materials. pp. 163-209. Cambridge, Cambridge University Press.
Klemola, H y Nifminen, M. On the strain-hardeninng parameters of metals. Metallurgical transactions. (1974). vol. 5, pp. 1863- 1866.
Appiah, E et al. A new constitutive model for prediction of springback sheet metal forming. Material processing and desing:modeling, simulation and applications, numiform 2004. pp. 1651-1657.
Wagoner, R. Advances in springback. American Institute of physics, numisheet 2005. 209-216.
Oliveira, M et al.. Study on the influence of the work hardeninng models constitutive parameters identification in the springback prediction. American institute of physic, numisheet 2005, 253-258.
Torres, M. et al. Análisis de las curvas esfuerzo-deformación de un acero 1040 mediante la ecuación de Voce. Revista latinoamericana de metalurgia y materiales. (2000). vol. 20, no 2, 24-32.
Garcia-Romeu, M. L. Contribución al estudio del proceso de doblado al aire de chapas: modelo de predicción del ángulo de recuperación y del radio de doblado final, Disertación doctoral,Dpto. Ingeniería mecánica, universidad de Girona, Girona, 2005.
J. Wang (2008). «Springback control of sheet metal air bending process,» Journal of manufacturing processes, vol. 10, pp. 21-27.
Aguiar,J. Sheet bending theory applied to three roll process. 1er Congresso Brasileiro de Engenhariah de facricacao, Curitiba, 2001.
Lubriner, J. Plasticity theory. Elastic-plastic bending, Berkeley. (2006). Pearson. 229-245.
Xio, H et al. Elastoplasticity beyond small deformations. Acta Mechanica. (2006). Bochun, Splinger-Verlag. 31-111.
Rees,D. Descriptions of reversed yielding in bending. Journal of mechanical engineering sciences. (2007). vol. 221, no c, 981-992.
Yi,H. Analytical prediction of springback based on residual differential strain during sheet metal bending. Journal of mechanical engineering scienc. (2008). vol. 222, no c, 117-129.
Dariani,B. A new approach for inverse analysis of springback in sheet bending process. Journal on engineering manufacture. (2008). vol. 222, no B. 1363-1374,
Panthi, S y. Ramakrishnan, N. Semi analitical modelinng of springback in arc bending and effect of forming load. Transaction of nonferrous metals society of china. (2011). vol.21, pp. 2276-2284.