Desarrollo del Robot Paralelo Parallix LKF-240
Main Article Content
Abstract
Downloads
Article Details
DECLARATION OF ORGINIALITY OF SUBMITTED ARTICLE
With this document, I/We certify that the article submitted for possible publication in the institutional journal INGENIO MAGNO of the Research Center Alberto Magno CIIAM of the University Santo Tomás, Tunja campus, is entirely of my(our) own writing, and is a product of my(our) direct intellectual contribution to knowledge.
All data and references to completed publications are duly identified with their respective bibliographical entries and in the citations thus highlighted. If any adjustment or correction is needed, I(we) will contact the journal authorities in advance.
Due to that stated above, I(we) declare that the entirety of the submitted material is in accordance with applicable laws regarding intellectual and industrial property, and therefore, I(we) hold myself(ourselves) responsible for any complaint related to it.
If the submitted article is published, I(we) declare that I(we) fully relinquish publishing rights of the article to the University Santo Tomás, Tunja campus. As remuneration for this relinquishment of rights, I(we) declare my(our) agreement to receive two (2) copies of the edition of the journal in which my(our) article appears.
References
especificaciones técnicas y desarrollo de un robot paralelo traslacional con 3 gdl para tareas de carga descarga industrial, Semana de la Ciencia y la Innovación 2010, México, D.F, 2010.
(Castillo, (Merlet 1997) Merlet, J.P. (1997) “Les robots 2002)Castillo-Castaneda, parallèles”, Collection robotique, Editorial E., HERMES, Francia, 1997.
Sanchéz-Flores, A., López-Cajún, C. (2002) “Mathematical Characterization of the Workspace of a 6 dof Parallel Robot for Reverese Engineering”, 14th CISM-IFTOMM Symposium on the Theory and Practice of Robots and Manipulators, July 1-4, Udine, Italy, 2002.
(Castillo, 2008) Castillo-Castaneda E., Takeda Y., Improving Path Accuracy of a Crank-type 6-dof Parallel Mechanism by Stiction Compensation, MECHANISM AND MACHINETHEORY, ISSN: 0094-114X,Vol. 43, pp. 104-114, 2008.
(Castillo, 2010) Castillo-Castaneda E., Registro Público del Derecho de Autor, Número de registro: 03-2010-060210431600-01,
Autor: Castillo Castañeda Eduardo, Título: ROBWIN: Interface gráfica usuario para el robot PARALLIX LKF-2040, Titular: Instituto
Politécnico Nacional, fecha: 17 de Junio de 2010.
(Ceccarelli, 1997)Ceccarelli, M. (1997).“A formulation for the workspace boundary of general n-revolute manipulators”, International
Journal ofMechanism and Machine Theory, 32:895-902, 1997.
(Clavel, 1991) Clavel, R. (1991) “Conception d’un robot parallèle rapide à 4 degrés de liberté”, Tesis doctoral, Ecole Polytechnique Fédérale de Lausanne, Suiza, 1991.
(Dombre, 1998) Dombre, E., Khalil, W. (1988) “Modélisation et commande des robots”, Editions Hermès, Paris, Francia, 1998. (González, 2011) González Hernández A., Castillo Castañeda E., Zavala de Paz J., Metodología para la obtención de la rigidez en un robot paralelo, Congreso Internacional sobre Innovación y Desarrollo Tecnológico, Morelos, México, 2011.
(Márquez, 2002) Márquez-Santoyo, P., Castillo-Castañeda, E., Camacho-Velázquez, R. (2002) “Motion Control Study of a 3RSS ParallelMechanism”, International SymposiumonMultibodySystems and (Merlet, 1995) Merlet, J.P. (1995) “Designing a parallelmanipulator for a specificworkspace”, Raport de Recherche No. 2527, Institut National de Recherche en Informatique et en
Automatique, Francia, 1995.
(Mouly, 1993) Mouly, N. (1993) “Dévelopment d’une famille de robots parallèles a motorisation éléctrique”, Tesis de doctorado, Ecole Supérieure de Mines de Paris, Francia,1993.
(Pierrot, 1991)Pierrot, F., Dauchez, P., Fournier, A. (1991) “Towards a fully-parallel 6 d.o.f. robot for high speed applications”, In IEEE Int. Conf. onRobotics and Automation, pp. 1288-1293, Sacramento, USA, 1991.
(Rodríguez, 2010) Rodríguez-Vázquez A.O, Castillo-Castañeda E., Cálculo de la exactitud y la repetibilidad de robots manipuladores utilizando visión por computadora, sometido a la Revista Iberoamericana de Automática e Informática Industrial, Junio 2011.
(Sánchez, 2001) Sánchez-Flores, A. (2001) “Cálculo de la Cinemática Inversa y el Espacio de Trabajo de un Manipulador Paralelo de 6 Grados de Libertad”, Tesis para obtener el grado de Maestro en Ciencias, Universidad Autónoma de Querétaro, México, Noviembre, 2001.
(Sánchez, 2000) Sánchez-Flores, A., Castillo-Castaneda, E. (2000) “Cálculo del espacio de trabajo para el diseño de un robot paralelo de seis grados de libertad”, 6a Conferencia de Ingeniería Eléctrica CIE 2000, Ciudad de México, México, 2000.
(Stewart, 1965) Stewart, D. (1965) “A platform with 6 degrees of freedom”, Proc. of the Institute of Mechanical Engineers (Parte 1, 15), pp 371-386, 1965.
(Takeda, 1999) Takeda, Y., Funabashi, H., Kimura, M. (1999) “Development of a Spatial Six-Degree of Freedom In-Parallel Actuated Worktable with Rolling Spherical Bearings”, In Proceedings of the Ninth International Conference on Advanced Robotics, pp 551-556, Tokio, Japón, Octubre 25-27, 1999.
(Tsai, 1999) Tsai, L.W. (1999) “Robot analysis”, John Wiley & Sons, Inc, 1999.