Basic Principles For Programming A Numerically Controlled Machine

Article Sidebar

Ingenio Magno Vol - 14-1
PDF (Español (España))
Published: Jul 27, 2023
Keywords:
Learning, CNC, G-Code, Control Systems, Machining, Programming

Main Article Content

Luz Hernández Gegen
Universidad de Pamplona
Eduardo Madrid Carrillo
Universidad de Pamplona
Carlos Sandoval Martínez
Utempo SAS

Abstract

This article presents the basic steps for programming an automated machine focusing on lathe and milling machines with Computer Numerical Control (CNC). The objective is to introduce the fundamental programming concepts for the industry's two most commonly used controllers. This guide provides the step-by-step programming process supported by concrete theoretical material, allowing readers to delve into machine language learning and provide essential information in programming. The offered result is educational in nature, allowing beginners to analyze the solved exercise, replicate it, and with the concepts learned, be able to perform the proposed activity. This document is to be an initiation into programming automated machines, primarily the lathe and milling machines.

Downloads

Download data is not yet available.

Article Details

How to Cite
Hernández Gegen, L., Madrid Carrillo, E., & Sandoval Martínez, C. (2023). Basic Principles For Programming A Numerically Controlled Machine. Ingenio Magno, 14(1), 70 - 77. Retrieved from http://revistas.ustatunja.edu.co/index.php/ingeniomagno/article/view/2789
Issue
Vol. 14 No. 1 (2023): Ingenio Magno vol. 14 - 1
Section
Articulos

DECLARATION OF ORGINIALITY OF SUBMITTED ARTICLE


With this document, I/We certify that the article submitted for possible publication in the institutional journal INGENIO MAGNO of the Research Center Alberto Magno CIIAM of the University Santo  Tomás, Tunja campus, is entirely of my(our) own writing, and is a product of my(our) direct intellectual contribution to knowledge.

All data and references to completed publications are duly identified with their respective bibliographical entries and in the citations thus highlighted.  If any adjustment or correction is needed, I(we) will contact the journal authorities in advance.

Due to that stated above, I(we) declare that the entirety of the submitted material is in accordance with applicable laws regarding intellectual and industrial property, and therefore, I(we) hold myself(ourselves) responsible for any complaint related to it.

If the submitted article is published, I(we) declare that I(we) fully relinquish publishing rights of the article to the University Santo Tomás, Tunja campus.  As remuneration for this relinquishment of rights, I(we) declare my(our) agreement to receive two (2) copies of the edition of the journal in which my(our) article appears.

References

[1] Fagor, “FAGOR CNC TORNO 8055,” vol. 2, no. 1, p. 355, 2014.

[2] L. Ruiz, El control numerico computarizado en el desarrollo industrial, vol. 0, no. 0. 2008.
[3] R. Aviña Hernandez, “Metodología Para La Capacitación En Máquinas De Control Numérico,” 2011.

[4] S. Kalpakjian and S. R. Schmid, Manufactura, ingeniería y tecnología. 2002.

[5] I. García Hernández and G. de las M. de la Cruz Blanco, “Las guías didácticas: recursos necesarios para el aprendizaje autónomo,” Edumecentro, vol. 6, no. 3, pp. 162–175, 2014.

[6] T. M. Criollo Consuegra and O. R. Aguirre Sesme, “incidencia de los recursos didácticos desactualiza dos en el aprendizaje del área de estudios socia les propuesta: elaboración de un manual de recursos didácticos actualizados dirigido a docentes y discentes del noveno grado de la es cuela de educación bá,” 2015.

[7] E. Crisol Moya and A. Romero López, “Las Guías de Aprendizaje Autónomo como Herramienta Didáctica de Apoyo a La Docencia,” Esc. Abierta, vol. 0, no. 0, pp. 9–31, 2012.

[8] M. V. Guamán Alarcón and M. J. Camacho Camacho, “Implementación De Guía De Prácticas Para La Enseñanza De La Fabricación De Elementos Maquinados Mediante El Torno Con Control Numeríco Computarizado Del Laboratorio De Máquinas-Herramientas De Ingeniería Mecánica,” 2009.

[9] Jarosz, K., Chen, Y. T., & Liu, R. (2023). "Investigating the differences in human behavior between conventional machining and CNC machining for future workforce development: A case study. Journal of Manufacturing Processes", 2022.



[10] Martins, A., Lucas, J., Costelha, H., & Neves, C. "Journal of Industrial Information Integration CNC Machines Integration in Smart Factories using OPC UA". 2023.

[11] L. P. Sepúlveda Sanhueza and R. Leiva Díaz, “Construcción de Router Cnc Para su Utilización como Herramienta en el Desarrollo de PCB´S.,” Universidad Adventista de Chile, 2019.

[12] J. F. Rivadeneira Caipe, “Implementación de un Módulo CNC de Fresado,” Escuela Politécnica Nacional Quito Ecuador, 2020.

[13] J. R. Ocampo and I. de J. Deras, “Aplicación Integrada para Construcción de PCBs mediante Tecnología CNC y Ajuste Automático a la Superficie,” Innovare Rev. Cienc. y Tecnol., vol. 3, no. 1, pp. 27–41, 2014, [Online]. Available: https://lamjol.info/index.php/INNOVARE/article/view/2311/2092.

[14] Ghosh, H., Mukhopadhyay, S., Saha, M., Banerjee, S., & Panja, B. "Study of machining characteristics of 45C8 carbon steel alloy in CNC turner. Materials Today: Proceedings". 2023.

[15] M. Groover, Fundamentos de manufactura. 1997.


[16] A. M. Llerena Pintag and m. O. Coronel Hernandez, “Estudio, diseño e implementación de una máquina herramienta de control numérico computarizado, caso práctico prototipo de fresadora para madera.,” 2014.