Diseño de un Sistema de Control de Agua de Imbibición Automatizado en Procesos de Molienda

Article Sidebar

PDF (Español (España))
Published: Jan 17, 2023
Keywords:
Imbibition water, mass flow, grinding, load cells, encoder sensors, Vijeo Designer software, Twido Suite software.

Main Article Content

Yovana Edith Medina Vásquez
Facultad de Ingeniería Mecánica Eléctrica, Universidad César Vallejo

Abstract

The present research work was carried out in a sugar factory in the department of Lambayeque, whose imbibition water control process was performed manually by an operator, through a flow meter, causing that the imbibition water flow and the sugar cane mass were not constant, affecting the production cycle. The objective was to design an automation system for the control of the imbibition water flow in the sugar cane milling process. A mass flow meter with load cells was installed to measure the mass flow of sugar cane, and pulse encoder sensors were installed to find the times of passage of the mass flow through the mills. As a result of the automation of the process, a constant mass flow rate was established and the variables were displayed on the HMI screen with optimum resolution. The programming was developed with Vijeo Designer v6.1 software, which is a state-of-the-art application with which the user can create operator panels and configure operating parameters for user-machine interface devices. A program for the automatic imbibition water control system was developed in Twido Suite v3.2 software because of its natural relationship with the logic based on control circuits.

Downloads

Download data is not yet available.

Article Details

How to Cite
Medina Vásquez , Y. E. (2023). Diseño de un Sistema de Control de Agua de Imbibición Automatizado en Procesos de Molienda. Ingenio Magno, 13(2), 48 - 55. Retrieved from http://revistas.ustatunja.edu.co/index.php/ingeniomagno/article/view/2605
Issue
Vol. 13 No. 2 (2022): Ingenio Magno vol. 13-2
Section
Articulos

DECLARATION OF ORGINIALITY OF SUBMITTED ARTICLE


With this document, I/We certify that the article submitted for possible publication in the institutional journal INGENIO MAGNO of the Research Center Alberto Magno CIIAM of the University Santo  Tomás, Tunja campus, is entirely of my(our) own writing, and is a product of my(our) direct intellectual contribution to knowledge.

All data and references to completed publications are duly identified with their respective bibliographical entries and in the citations thus highlighted.  If any adjustment or correction is needed, I(we) will contact the journal authorities in advance.

Due to that stated above, I(we) declare that the entirety of the submitted material is in accordance with applicable laws regarding intellectual and industrial property, and therefore, I(we) hold myself(ourselves) responsible for any complaint related to it.

If the submitted article is published, I(we) declare that I(we) fully relinquish publishing rights of the article to the University Santo Tomás, Tunja campus.  As remuneration for this relinquishment of rights, I(we) declare my(our) agreement to receive two (2) copies of the edition of the journal in which my(our) article appears.

References

[1] Acosta Nieto, M. J. (2008). Tesis. Diseño de Interfaz Hombre-Máquina para el proceso de Molienda Ingenio Providencia S.A. Cali, colombia.

[2] Alcocer Quinteros, P., Calero Zurita, M., Cedeño Zambrano, N., & Lapo Manchay, e. (2020). Automatización de los Procesos Industriales. Journal of Business and Entrepreneurial Studies.

[3] Atasal. (setiembre de 2011). Eficacia de extracción de sacarosa de molinos vrs factores operativos de imbibición % caña, índice de preparación y extracción diluida. El Salvador.

[4] Dianzhi, H., Pingping, X., Cheng, H., Yanguang, Z., Xiaomai, Y., & Shan, C. (2015). Construction and Research: an Automation Control System of Sugarcane Balanced Crushing. ResearchGate.

[5] Omkar, P. T. (September de 2012). Thesis . Modelling the Flow of Cane Constituents through the Milling Process of a Raw Sugar Factory. Queensland University of Technology.

[6] Schneider, E. (enero de 2005). Instrumentación y Control. Obtenido de https://instrumentacionycontrol.net/wp-content/uploads/2017/11/IyCnet_VijeoDesigner_Tutorial_ESP-min.pdf

[7] Schneider, E. (2008). Controladores programables Twido- Guía de referencia de software. TWD USE 10AE spa Version 3.2. España.