Methodology for the location of the acoustic emission sensor in a gearbox

Article Sidebar

PDF (Español (España)) Sin título (Español (España))
Published: Jul 3, 2019
Keywords:
Acoustic Emission, Condition Monitoring, Gearbox, Frequency Indicators, Gear Frequency

Main Article Content

Edison Eugenio Pacheco
Universidad Politécnica Salesiana
René Vinicio Sánchez Loja
Grupo de Investigación y Desarrollo en Tecnologías Industriales (GIDTEC), Universidad Politécnica Salesiana, Cuenca – Ecuador
Diego Cabrera
Grupo de Investigación y Desarrollo en Tecnologías Industriales (GIDTEC), Universidad Politécnica Salesiana, Cuenca – Ecuador
Mariela Cerrada
Grupo de Investigación y Desarrollo en Tecnologías Industriales (GIDTEC), Universidad Politécnica Salesiana, Cuenca – Ecuador
Rafael E Vásquez
Department of Mechanical Engineering, Universidad Pontificia Bolivariana, Medellín, Colombia

Abstract

The purpose of this document is to identify the best position of an acoustic emission sensor in a gearbox for fault detection. The acoustic emission sensor was located in the four side walls of the gearbox, where three signals were acquired in each position to be analyzed in the time domain by condition indicators and finally the best signals were analyzed in the frequency do-main by means of the gear step frequency. As a result, it was obtained that the sensor must be positioned in the shorter length lateral parts of the gearbox

Downloads

Download data is not yet available.

Article Details

How to Cite
Pacheco, E. E., Sánchez Loja, R. V., Cabrera, D., Cerrada, M., & Vásquez, R. E. (2019). Methodology for the location of the acoustic emission sensor in a gearbox. Ingenio Magno, 9(2), 32-42. Retrieved from http://revistas.ustatunja.edu.co/index.php/ingeniomagno/article/view/1627
Issue
Vol. 9 No. 2 (2018): Ingenio Magno vol. 9-2
Section
Artículos Vol. 9-2

DECLARATION OF ORGINIALITY OF SUBMITTED ARTICLE


With this document, I/We certify that the article submitted for possible publication in the institutional journal INGENIO MAGNO of the Research Center Alberto Magno CIIAM of the University Santo  Tomás, Tunja campus, is entirely of my(our) own writing, and is a product of my(our) direct intellectual contribution to knowledge.

All data and references to completed publications are duly identified with their respective bibliographical entries and in the citations thus highlighted.  If any adjustment or correction is needed, I(we) will contact the journal authorities in advance.

Due to that stated above, I(we) declare that the entirety of the submitted material is in accordance with applicable laws regarding intellectual and industrial property, and therefore, I(we) hold myself(ourselves) responsible for any complaint related to it.

If the submitted article is published, I(we) declare that I(we) fully relinquish publishing rights of the article to the University Santo Tomás, Tunja campus.  As remuneration for this relinquishment of rights, I(we) declare my(our) agreement to receive two (2) copies of the edition of the journal in which my(our) article appears.

Author Biography

Edison Eugenio Pacheco, Universidad Politécnica Salesiana

Grupo de Investigación y Desarrollo en Tecnologías Industriales (GIDTEC), Universidad Politécnica Salesiana, Cuenca – Ecuador

References

Elforjani, M., & Mba, D. (2008). Monitoring the onset and propagation of natural degrada-tion process in a slow speed rolling element bearing with acoustic emission. Journal of Vi-bration and Acoustics, 130(4), 041013.

Elforjani, M., Mba, D., Muhammad, A., & Sire, A. (2012). Condition monitoring of worm gears. Applied Acoustics, 73(8), 859–863.

Ferrando Chacon, J. L. (2015). Fault detection in rotating machinery using acoustic emission (PhD Thesis). Brunel University London.

Mba, D., & Rao, R. B. (2006). Development of Acoustic Emission Technology for Condition Monitoring and Diagnosis of Rotating Machi-nes; Bearings, Pumps, Gearboxes, Engines and Rotating Structures.

Naumann, J. (2016). Acoustic emission mo-nitoring of wind turbine bearings (PhD Thesis). University of Sheffield.

Non-Destructive, T. J. S. for. (2016). Practical Acoustic Emission Testing. Springer.

Pao, Y.-H., Gajewski, R. R., & Ceranoglu, A. N. (1979). Acoustic emission and transient waves in an elastic plate. The Journal of the Acoustical Society of America, 65(1), 96–105.

Sidorova, A. (2010). Aplicación del método de la emisión acústica en la monitorización de las estructuras de hormigón (Master’s Thesis).

Universitat Politècnica de Catalunya. Zurita Millán, D. (2013). Mechanical fault de-tection by means of AE analysis.