Electromechanical module for balancing of loads in three-phase lines through a sensor network

Article Sidebar

PDF (Español (España))
Published: Jun 2, 2018
Keywords:
Load balance, phase switching

Main Article Content

Diana Riscanevo Espitía
Escuela de Posgrados de Ingeniería, Grupo de Investigación INFELCOM, UPTC
Oscar Bellon Hernández
Facultad de Estudios a Distancia, Grupo de Investigación TICA, UPTC
Germán Amezquita Becerra
Escuela de Posgrados de Ingeniería, Grupo de Investigación INFELCOM, UPTC

Abstract

This document describes the process of design and assembly of a system that combines an electronic circuit with electromechanical relays to switch the connection between the 3 phases that feed 3 single-phase load circuits with resistors in parallel. The module was designed as a system with 3 stages: control, switching and current sensors. A fourth communication stage can be inferred from the fact that the module can be connected both by USB protocol and BLUETOOTH. This work also reports the first advance in the development of the project DESIGN OF AN ANDROID APPLICATION FOR THE MONITORING AND REMOTE CONTROL OF AN INTEGRATED SENSOR NETWORK, which main objective is to implement a program at the mobile application level to facilitate the balance of charges in three-phase networks through remote monitoring.

Downloads

Download data is not yet available.

Article Details

How to Cite
Riscanevo Espitía, D., Bellon Hernández, O., & Amezquita Becerra, G. (2018). Electromechanical module for balancing of loads in three-phase lines through a sensor network. Ingenio Magno, 8(2), 33 - 43. Retrieved from http://revistas.ustatunja.edu.co/index.php/ingeniomagno/article/view/1503
Issue
Vol. 8 No. 2 (2017): Ingenio Magno vol. 8-2
Section
Artículos Vol. 8-2

DECLARATION OF ORGINIALITY OF SUBMITTED ARTICLE


With this document, I/We certify that the article submitted for possible publication in the institutional journal INGENIO MAGNO of the Research Center Alberto Magno CIIAM of the University Santo  Tomás, Tunja campus, is entirely of my(our) own writing, and is a product of my(our) direct intellectual contribution to knowledge.

All data and references to completed publications are duly identified with their respective bibliographical entries and in the citations thus highlighted.  If any adjustment or correction is needed, I(we) will contact the journal authorities in advance.

Due to that stated above, I(we) declare that the entirety of the submitted material is in accordance with applicable laws regarding intellectual and industrial property, and therefore, I(we) hold myself(ourselves) responsible for any complaint related to it.

If the submitted article is published, I(we) declare that I(we) fully relinquish publishing rights of the article to the University Santo Tomás, Tunja campus.  As remuneration for this relinquishment of rights, I(we) declare my(our) agreement to receive two (2) copies of the edition of the journal in which my(our) article appears.

References

Brea, E. (2016). Optimización de balance de cargas en sistemas de distribución de energía eléctrica. Revista de la Facultad de Ingeniería, 24(3). Recuperado agosto 14, 2017, a partir de http://revistadelafacultaddeingenieria.com/index.php/ingenieria/article/view/386

Carvajal, S., & Jiménez, J. D. M. (2013). Impacto de la generación distribuida en el sistema eléctrico de potencia colombiano: un enfoque dinámico. Revista Tecnura, 17(35), 77–89.

Estrada, R., Isabel, M., Arango Aramburo, S., Álvarez, V., & Guillermo, L. (2012). LA CON-FIABILIDAD EN LOS SISTEMAS ELÉCTRICOS COMPETITIVOS Y EL MODELO COLOMBIANO DE CARGO POR CONFIABILIDAD. Cuadernos de Economía, 31(56), 199–222.

Exposito, A. G., Gomez-Exposito, A., Conejo, A. J., & Canizares, C. (2016). Electric Energy Systems: Analysis and Operation. CRC Press.

Ghorbani, E., Bina, M. T., & Babadi, A. N. (2017). Capacitor voltage balancing and circulating current suppression of modular multi-level converters under unbalanced load condition. 2017 Iranian Conference on Electrical Engineering (ICEE) (pp. 1417–1422). Presentado en 2017 Iranian Conference on Electrical Engineering (ICEE). istd016A.pdf. (s/f). . Recuperado septiembre 18, 2017, a partir de http://www.electroni-caestudio.com/docs/istd016A.pdf

Li, Y., & Thai, M. T. (2008). Wireless Sensor Networks and Applications. Springer Science & Business Media.

Mathieu, J. L., Koch, S., & Callaway, D. S. (2013). State Estimation and Control of Electric Loads to Manage Real-Time Energy Imbalance. IEEE Transactions on Power Systems, 28(1), 430–440.

Micheloud, O. M., & Vicini, R. A. (2012). Smart Grids: Fundamentos, Tecnologias y Aplicaciones. Cengage Learning Editores.

MIT App Inventor | Explore MIT App Inventor. (s/f). . Recuperado septiembre 19, 2017, a partir de http://appinventor.mit.edu/explore/

Ortega, E. M. I. (2012). Redes de Comunicación en Smart Grid. Ingenius, 0(7), 36–55.

Rastegar, M., Saradarzadeh, M., Farhangi, S., & Zare-Sakhvidi, A. (2017). An improved D-SSSC voltage and current load balancing control strategy under unbalanced load. 2017 Iranian Conference on Electrical Engineering (ICEE) (pp. 1248–1253). Presentado en 2017 Iranian Conference on Electrical Engineering (ICEE).

Romero Acero, Á., Marín Cano, A., & Jiménez Builes, J. A. (2013). Red de sensores inalámbricos para el monitoreo de alertas tempranas en minas subterráneas: una solución a la problemática de atmósferas explosivas en la minería de carbón en Colombia. Ingeniería y Desarrollo, 31(2). Recuperado agosto 14, 2017, a partir de http://www.redalyc.org/resumen.oa?id=85229155003

Sevilla, A. G. P., & Fernández, F. O. A. (2013). Evolución de las redes eléctricas hacia Smart Grid en países de la Región Andina. Revista Educación en Ingeniería, 8(15), 48–61.

Yan, R., & Saha, T. K. (2012). Voltage Variation Sensitivity Analysis for Unbalanced Distribution Networks Due to Photovoltaic Power Fluctuations. IEEE Transactions on Power Systems, 27(2), 1078–1089.