Caracterización de un material compuesto de Tetra Pak, reforzado con polietileno de baja densidad (PEBD) y conformado en prensa de calor
Main Article Content
Abstract
Downloads
Article Details
DECLARATION OF ORGINIALITY OF SUBMITTED ARTICLE
With this document, I/We certify that the article submitted for possible publication in the institutional journal INGENIO MAGNO of the Research Center Alberto Magno CIIAM of the University Santo Tomás, Tunja campus, is entirely of my(our) own writing, and is a product of my(our) direct intellectual contribution to knowledge.
All data and references to completed publications are duly identified with their respective bibliographical entries and in the citations thus highlighted. If any adjustment or correction is needed, I(we) will contact the journal authorities in advance.
Due to that stated above, I(we) declare that the entirety of the submitted material is in accordance with applicable laws regarding intellectual and industrial property, and therefore, I(we) hold myself(ourselves) responsible for any complaint related to it.
If the submitted article is published, I(we) declare that I(we) fully relinquish publishing rights of the article to the University Santo Tomás, Tunja campus. As remuneration for this relinquishment of rights, I(we) declare my(our) agreement to receive two (2) copies of the edition of the journal in which my(our) article appears.
References
Amit, M., Anil, K. y Barik, B. P. (2015). Comparative studies on physico-mechanical properties of composite materials of low density polyethylene and raw kaolin. Journal of Asian Ceramic Societies, 3(2), 212-216.
Ayrilmis, N., Kaymakci, A., Akbulut, T. y Mertoglu, G. (2013). Mechanical performance of composites based on wastes of polyethylene aluminum and lignocellulosics. Composites Part B: Engineering, 47, 150-154.
Betancourt, H. E. (2009). Plan de negocios para la creación de una planta de procesamiento de envases usados y desechos posindustriales de tetra Pak, para la producción de láminas aglomeradas de TEKTAN (tesis de
pregrado). Bogotá: Pontifcia Universidad Javeriana.
Domínguez, J. A., Güémez, D. (2010). Fabricación y evaluación de paneles aplicables a la industria de la construcción a partir del reciclaje de envases multicapa (tetra brik). Ingeniería, Revista Académica de la FI-UADY, 14(3), 191-196.
Espitia, H. M., (2010). Aislamiento de nanofibras de celulosa a partir de residuos agroindustriales de fque y caña de azúcar, con potencial aplicación en reforzamiento de polímeros termoplásticos (tesis de pregrado). Medellín: Universidad Nacional de Colombia.
Guerrero, D., Bayona, A., Guerrero, C., Hidalgo, G., López, P., Picón, Y. y Robles, S. (2012) Diseño de una fábrica para la elaboración de planchas de TECTÁN localizada en la provincia de Piura (tesis de pregrado). Piura: Universidad de Piura.
Hidalgo, A. M. (2013). Diseño de un proceso para la elaboración de tableros aglomerados a partir de envases Tetra Pak (tesis de pregrado). Riobamba: Escuela Superior Politécnica de Chimborazo.
Hidalgo, M. (2011). Manufacturing rigid board by packaging waste containing aluminum and Polyethylene. JSIR, 70(03), 232-234.
Hidalgo, M. A. y Muñoz, M. F. (2015). Interacción interfacial del compuesto LDPE/Al reforzado con fibra de fique: influencia de la
temperatura. International Journal of Polymer Science, 2015. Recuperado de http://dx.doi.org/10.1155/2015/386325
Hussain, S., Mahmood, Z., Ahmad, I., Mahmood, Q., Ahmad, Z., Khan, J., Farooq, A., Rashid, N. y Wu, D. (2010). Low temperature conversion of plastic waste into light hydrocarbons. Journal of Hazardous Materials, 179(1-3), 15-20.
Korkmaz, A., Yanik, J., Brebu, M., Vasile, C., (2009). Pyrolysis of the Tetra Pak. Waste Management, 29(11), 2836-2841.
Kumar, D., Han, J., Corey R., Parsons, R. L. y Brennan, J. (2015). Laboratory evaluation of installation of a steel-reinforced high-density
polyethylene pipe in soil, a Terracon. Elsevier Science, 49, 199-207.
Martínez-López, M., Martínez-Barrera, G., Barrera-Díaz, C. E. y Ureña-Núñez, F. (2015). Materiales provenientes del reciclamiento de
envases de Tetra Pak y su uso en concreto. Recuperado de http://omniascience.com/monographs/index.php/monografcos/article/
viewFile/247/146
Olafsson, M., Jägerstad, R., Öste, B., Wesslen, T. y Hjertberg, (1993). Effects of different organic acids on the adhesion between polyethylene flm and aluminium foil. Food Chemistry, 47(3), 227-233.
Pedroza, T. E. (2013). Proceso de reciclaje de Tetra Pak como material de construcción (tesis de pregrado). Tuxpan: Universidad Veracruzana.
Reyes, P. H., (2007). Reciclaje de envases de Tetra Pak: su factibilidad técnica y económica (tesis de pregrado). Lima: Universidad Nacional Mayor de San Marcos.
Vasile, C., Hooshang P., Mihai, B., Onu, P., Darie, H. y Ciocâlteu, S. (2001). Thermal and catalytic decomposition of mixed plastics. Journal of Analytical and Applied Pyrolysis, 57(2), 287-303.